Description:
Discussions about Intel systems and parts.
|
|
|
Intel DP35DP RAID Application?
|
| |
I used to have an application from Intel that would give me the status of my RAID-1 array. After my yearly reformat I wanted to download everything off Intel's site and avoid using the original CD to keep everything as new and updated as possible. I tried installing the Management Engine driver... more »
|
|
|
F5 Drivers for Intel DP35DP
|
| |
I have my Intel DP35DP set up for RAID 1 - mirrored. When I reinstall Windows XP, and use the F5 driver disk, which set do I choose? There's several and I'm completely stumped. The last time Id id this I chose each one in turn, let Windows install and then blue screen - reinstall with the next set. I'd rather not do that.... more »
|
|
|
Shut Down Problem with Intel DP35DP
|
| |
I an running an Intel DP35DP, with Windows XP Pro, 1G of RAM (soon to be 4) a SilverStone Tech powersupply at 450 watt. I am taking advantage of the RAID array and have two Western Digital 230G drives on there and they're running without any problems. When I shut down a few minutes ago, both drives powered down, but the... more »
|
|
|
Motherboard DG33 for Core2Quad Q6600 : Power Consumption question
|
| |
Hi, I have this motherboard installed with 2 GB RAM, a 250 GB Seagate Baracuda hard disk and LG DVD RW drive. My power-supply says its 450W. My UPS has a rating of 650 VA (should be around 350 watts). My display is also plugged into the UPS, which is a LG flatron 19" TFT. My UPS is not able to support my system during a power fluctuation.... more »
|
|
|
Intel® PRO/1000 PT Desktop Adapter - Linux Issues
|
| |
Hi Everyone, I have a Intel® PRO/1000 PT Desktop Adapter (PCI Express) installed in a system that i am running CentOS 5.2 with kernel version 2.6.18-92.1.10-el5. When I perform an lspci, the card is not listed however the PCI Express bus is listed. I am not receiving any error messages when i am trying to load the module however.... more »
|
|
|
Intel Embedded Graphic Driver silent install
|
| |
I am using Intel Embedded Graphic Driver (IEGD 8.0.2) for creating a graphic driver to my XPe target and would like to use the new “Silent install” feature in version 8. I don’t want to build a new XPe image but instead silent remote update the targets in the field. I tried executing the setup program like this “setup.exe –s” but still all... more »
|
|
|
Contact us
|
| |
sir/Madam, While when i am woking in my system suddenly restarts and shows a blue screen your hardware is not working properly...... Kindly cheak ur hardware or replace it new......... so kindly help us my system confirgration Board: Intel Corporation D101GGC AAD35788-310 Serial Number: BTGC715000BZ... more »
|
|
|
