Description:
Hardware compatibility with the Linux operating system.
|
|
|
Need advice on UPS
|
| |
Hi, excuse me if it' s consider as offtopic... I need to buy some UPS I never used any...There are so many nodays... Which are more reliable ...? Which direction should I look? It's for a home computer (monitor etc..) Thank you
|
|
|
Help on USB serial, TUSB3410 and custom devices
|
| |
Please can someone help me with finding some information on the following topic: I have a custom device which communicates via USB. It has a TI TUSB3410 but with a different VID and PID (i.e. not the default Texas Instruments ones). I know there is already a USB-to-serial driver in the kernel for this chip which would do all I need but is it possible... more »
|
|
|
Which drive does ata7 correspond to?
|
| |
Hello all, I am getting hard drive failures on a computer that I have setup for raid5. The drive identifier in the logs is ata7, but I am unsure which drive this corresponds to and am wondering if anyone has a technique for figuring this out? There are two separate "clumps" of drives; one is set of 4 is connected to a sata card and is received... more »
|
|
|
Help!! Implementing LEDs on AT91RM9200
|
| |
Hi! I'm new to Linux and am seeking for help. I think the question I should be asking would be "How do I link device driver to device node for ARM architecture AT91 RM9200." Or does anyone have a better suggestion as to how to implement the use of built in LEDs? Thanks in advance!!
|
|
|
Intermitent user unknown from postfix/pipe [postfix + mysql]
|
| |
Hello all, I am using postfix with mysql for virtual_mailbox_maps on a system. Everything seems to be working fine except for the fact that everynow and then I am getting messages like the following: May 20 14:56:18 <host> postfix/pipe[5168]: AA908518321: to=<<user>@<domain2>>, orig_to=<<user>@<domain1>>, relay=maildrop,... more »
|
|
|
Bluetooth USB Dongle?
|
| |
Has anyone had experience adding Bluetooth to a Linux machine? Any comments on brands, compatibility, gotchas, etc? I want to set up Bluetooth networking to a PDA and am wondering which device I should get. In particular I'm wondering about the mass-market dongles from Staples, Walmart, etc. Thanks in advance.... more »
|
|
|
Linux and wireless pluscom ZD1211B
|
| |
Hello, I'm new to Linux so prepare for stupid questions. I'm trying to setup a PC with Linux and a wireless USB Pluscom ZD1211B network stick. I'm using Red Hat Fedora 9 freshly downloaded. The fedora 9 seems to see the stick as a Zydas WLA-54L. But all I get is Set Mode 8B06 SET fail on device wlan0 ; Invalid argument... more »
|
|
|
DDS-4 tape drive compatiblity
|
| |
I was given two used SCSI DDS-4 tape drives, and I am testing them for use in making backups. One is an HP DAT40i (aka C5686A, C5683A) and the other is a Compaq SDT-10000 (EOD006, . I find that each drive can read the tapes that it writes, but that neither drive can read the tapes written by the other.... more »
|
|
|
installation of webcam fails: no connection to /dev/video0
|
| |
I have a webcam which should be supported by gspca/spca5xx - kernel module. I use ubuntu 7.10. the module gspca is automatically loaded, and modinfo gspca yields a lot of messages. But when I try to get images from my webcam with camorama, I get the error message: "could not connect to video device (/dev/video0). Please check the... more »
|
|
|
